Continuous Improvement at Bri-Mar Manufacturing, LLC
New- June 2011
Bri-Mar is proud to introduce our LE Line of Dump Trailers. These dump trailers have the same lifting strength of our contractor grade dumps, but feature a more economical price point. Please contact your Bri-Mar dealer for pricing and availiability.
New- April 2011
In the past, Bri-Mar’s landscape gate system did not work conveniently on a Bri-Mar dump trailer with ramps under the bed. We are now proud to announce that modifications have been made to the rear of a ramped Bri-Mar dump trailers, so that both gate types are usable and/or interchangeable. Please contact your Bri-Mar if you have any other further questions.
New- October 2010
In addition to partnering with PPG, we will be upgrading our equipment that is used in the cleaning phase of both our powder and liquid process. We are implementing the cleaning upgrade in both equipment and chemical within the next week. This is the foundation for any coating system and we will see improvements from this specific change. The complete transition to PPG will be accomplished over the next few months as we phase in the new powder and liquid products. Through this change we will also be reducing our VOC emissions by ~50% further reducing our carbon footprint.
We are excited about this change to provide you with the high level of quality you have come to expect from us. Please contact your Bri-Mar if you have any other further questions.
New – Next Generation Gooseneck
Bri-Mar is proud to introduce our new Next Generation Gooseneck. This Design has been nicknamed “The Cobra” and is available on any Bri-Mar unit with a standard or optional gooseneck. Please contact your Bri-Mar dealer for pricing and availiability.
EH825-14 Cobra – 2010
Bri-Mar is proud to introduce our new EH825-14 Cobra equipment trailer. Whenever you need an Equipment Trailer that does just a little more than the average trailer, you want to call Bri-Mar. Load your wide equipment on the EH825 with ease. Please contact your Bri-Mar dealer for pricing and availiability.
T16-10 – 2010
Bri-Mar is proud to introduce our new T16-10 tilt trailer. No need for ramps, just drive onto the low angle deck and gravity does the rest. any easier and it would load the equipment for you. Please contact your Bri-Mar dealer to order.
DT716LPHD Tri-Axle Dump Trailer- 2010
Bri-Mar is proud to introduce our new low profile heavy duty tri-axle dump trailers. After getting requests for higher GVWR dump trailers in the low pro style, we decided to take our existing DT716LPHD and offer it in either 18k GVWR (three 6k axles) or 21k GVWR (three 7k axles). Standard hitch type will be a bullnose pintle eye with goosenecks available as an option. Please contact your Bri-Mar dealer for pricing and availability.
Car Trailer with Wood Deck – 2010
Bri-Mar had added a wood deck option to our line of car trailers. Similar in most features to our steel deck units, the CHWD series now utilizes 2×8 pressure treated decking on the flat deck surface. The dove-tail remains diamond plate and the ramp system is also unchanged. Units are available in lenghts of 16′ and 18′ with either a 7k or 10k GVWR. Call your Bri-Mar Dealer to order.
Economy Equipment Trailers – 2010
As the economy slowed down, the demand for less expensive product lines increased. Thus the new EHLE series of equipment trailers from Bri-Mar. We’ve removed some of the more costly features and turned out a high quality but affordable skid-steer style trailer. Available in lengths of 14′, 16′, 18′, and either 7k or 10k GVWR, these units will fit those lighter-duty jobs and also your wallet. We still give you the quality of Dexter axles, LED lights, and a powder coat finish on these units. Call your Bri-Mar Dealer to order.
Solid Sides/Floor Utility Trailers – 2010
Back by popular demand is Bri-Mar’s SU series of utility trailers. Available in 5′ x 8′ or 5′ x 10′ and 3k GVWR, with 14 gauge steel sides and 12 gauge steel floors, these units continue to be a hit with the homeowner and weekend warrior. A drive-on gate is available for loading small equipment as well. Models are SU-508 and SU-510. Call your Bri-Mar Dealer to order.
Hot Dip Galvanizing – 2010
Bri-Mar is pleased to offer hot dip galvanizing on many of our products. Call your Bri-Mar Dealer to order.
Dump Insert Side Extensions – 2010
Bri-Mar is proud to introduce steel side extensions for our dump inserts. The extensions are 19″ high and will double the volume capacity of the insert. Call your Bri-Mar Dealer to order.
Tilt Car Trailer- 2009
Bri-Mar is proud to introduce our new power tilt car trailers to serve the needs of the car enthusiast and the towing/recovery industry. Units are available 18′ with a 7k or 10k GVWR (CHT18-7 and CH18-10). Also available is a 20′ unit with a 10k GVWR (CHT20-10). Features include: Power up and down hydraulics, 10 degree load angle, removable fenders, standard winch plate, etc. Call your Bri-Mar dealer to order.
Off Road Dump Trailer- 2009
Bri-Mar has developed a series of off road dump trailers, ideal for cemeteries, golf courses, and farmers that gives all the benefits of a dump trailer, but does not require registration. Features include: Wet line hydraulics (use a tractor hydraulic system), power up and down, high flotation tires, implement hitch, etx. The bed size is 5′ x 10′ with flared sides. Units are available in 10 GVWR with a walking beam suspension or 5k GVWR with a single idler axle (AG-510-10 and AG-510-5). There are no lights or brakes. Call your Bri-Mar dealer for more info.
New Rascal Dump Trailer- 2009
Our entry-level dump trailer line has continued to increase in popularity and Bri-Mar responded to requests for more variety. As a result, we now offer the R508LP-3, a 5′ x 8′ dump at 3k GVWR, and the R510LP-5, a 5′ x 10′ dump at 5k GVWR. These trailers continue to meet the needs of homeown and light duty landscaper. Call your Bri-Mar dealer for more info.
Utility / Landscape Trailers – 2009
Bri-Mar has added more units to our existing line of landscape trailers. New units include 5×8, 5×10, and 6×14 in single axle 3k GVWR, as well as 7×14 in tandem axle 7k GVWR. Models are UT-508, UT-510, UT-614, and UT-714. Call your Bri-Mar dealer for more info.
Utility Trailers- August 2008
Bri-Mar is proud to introduce four models of utility / landscape trailers. Single axle units are available in 10′ and 12′ lengths with a 3k GVWR. Tandem axle units are available in 16′ and 18′ lengths with a 7k GVWR. Production begins August 2008. Call your Bri-Mar Dealer to order.
6′ Dump Insert – January 2008
Bri-Mar is proud to introduce a 6′ long version of our dump insert, previously available only in 8′ length. This makes our dump insert available to customers with 6′ truck beds as well as 8′ truck beds. Both models have a lifting capacity of 6,000 and volume capacities of 2 cubic yards (8′ unit) and 1.5 cubic yards (6′ unit). Call your Bri-Mar Dealer to order.
EH824 – January 2008
Bri-Mar is proud to introduce the EH824 – a deckover equipment trailers with 20′ of flat deck, and 4′ of dovetail (24′ deck overall). This trailer comes with a choice of GVWR’s – either 14k or 16k. Hauling equipment or material is no problem for this trailer – the deck is 101″ wide and has 12 stake pocket tie-down points on each side. Call your Bri-Mar Dealer to order.
New Low Profile and Deckover Features – January 2008
Bri-Mar is proud to offer Adjustable Coulers and Dropleg Jacks on our LP series and Deckover series of dump trailers. The adjustable coupler allows various height settings to keep the trailer level. The dropleg jack raises and lowers more quickly than other jacks, speeding the hitching and unhitching process. We believe our customers will appreciate these new, more user-friendly features. Call your Bri-Mar Dealer to order.
16k GVWR Options – January 2008
Bri-Mar is proud to offer 16k GVWR options on the following models: EH820, EH824, HT820, HT824D. The 16k option includes 8k EZ Lube Dexter axles, 215/75R 17.5 Tire/Wheels, and a bullnose 20k pintle hitch. Call your Bri-Mar Dealer to order.
Fold Down Sides – January 2008
Bri-Mar is proud to introduce the DT610, DT712, and DT712T models with fold-down sides in 2008. This feature is a very user-friendly way to turn a dump trailer into a flat bed for hauling palletized material, lumber, or anything that needs side loaded. Call your Bri-Mar Dealer to order.
DTRascal-LP – October 2007
Bri-Mar is proud to introduce the low profile Rascal Dump Trailers. Available in 7k or 10k GVWR, this unit is perfect for homeowner and light landscaping use. It’s affordable price makes it possible for nearly anyone to own. Call your Bri-Mar Dealer to order.
HT824D-14 – April 2007
Bri-Mar is proud to introduce the HT824D-14 Hydraulic Tilt Trailer. With a 20′ tilting deck and a 4′ stationary front platform, this unit will easily handle your equipment and attachments. Contact your Bri-Mar Dealer to order.
Tie Down Rails on Dump Trailers – January 2007
Bri-mar is proud to introduce Tie Down Rails on Dump Trailers for 2007. This will simplify tying down the tarp system covering your load. These Tie Down Rails are not intended to be used for securing loads. They are designed to help secure tarps and other non-weight bearing objects.
HT820 Gooseneck – January 2007
Bri-mar Mfg. is proud to introduce a Gooseneck option for the HT820 Tilt Trailers. See your Bri-Mar dealer to order.
Winch Plate on Tilt Trailers – January 2007
Bri-mar Mfg. is proud to introduce a Winch Plate as standard on Hydraulic Tilt Trailer models HT16, HT18, and HT820. This Winch Plate is removable and will receive most brand name winches such as Warn, Mile-marker, and Ramsey.
New Tarp Kit with Enclosure – January 2007
Bri-mar Mfg. is proud to introduce the New Tarp Kit with a Chrome Diamond Plate Enclosure. This kit comes complete with mounting hardware and instruction for easy installation. Retrofit kits are also available for existing Bri-mar tarp kits in the field. See your Bri-mar dealer to order.
Aluminum Options for Car Trailers – January 2007
Bri-mar is proud to introduce Aluminum Options for Car Trailers. Add Aluminum Wheels and an Aluminum Diamond Plate Storage Box to your Bri-mar Car Trailer. Contact your Bri-mar dealer to order.
Chain Tray Cover for Equipment Trailers
Bri-mar Manufacturing LLC is proud to introduce the Chain Tray Cover for Equipment Trailers (Models EH14, EH16, EH18, EH20) as Standard Equipment for January 2007. This cover will protect your straps and chains from being lost or stolen. In addition, some states require all open carrying compartments to be covered – this will prevent you from being ticketed.
The Chain Tray Cover is also now available after-market for existing units in the field.
Chain Tray Cover comes with a Locking Hasp and mounting hardware.
Easily installs on models EH14, EH16, EH18, and EH20.
Feel free to contact your local Bri-mar dealer to order.
Board Gusset Kit for Dump Trailers
Bri-mar is proud to introduce Board Gusset Kits for Dump Trailers for December 2006. These kits will receive up to 12″ boards to increase side height as well as protect the sides from damage to the top rail.
(6) Powder Coated Brackets (2 – front, 2 – middle, 2 – rear) All Mounting Hardware Mounting Instructions Feel free to contact your local Bri-mar dealer to order.
New Bri-Mar Ramps
Bri-Mar is proud to introduce new ramps for our LP and LPHD Dump Trailers Series.
Improved features include:
Improved Traction Tubing Side Rails Angled Approach At Ground Side Lighter Weight (40 lbs. each set of 2)